Installation
Installation period
Aquascreen® should be installed in winter or early spring. All bottom coverings should be attached or weighted to the substrate; it is easier to secure the panels to the lake bottom when a minimum amount of plant material is present.
The screen can also be installed in autumn, when the growth period for aquatic plants is terminated and the plants have sunk to the bottom. While it is also possible to install Aquascreen® in summer, installation is easier when there is minimal plant cover. For summer installations, it is best to remove plants beforehand.
Instructions
The usual method is to roll the screen out from a boat. Scuba divers may be needed, as aquatic weeds may occur in water depths of 1 to 4 meters. Generally, the material is rolled out perpendicular to the shore (the usual direction of wind-induced lake currents) and adjacent lengths are overlapped at least 20 cm. All overlapped and outside edges should be well anchored with steel pins or rocks to ensure stability.
Aquascreen® is easy to cut with scissors; pieces and overlaps can then be sewn or welded. Snaps can also be used.
IT IS VERY IMPORTANT NOT TO COVER AQUASCREEN® WITH SAND, as this will provide an environment for weed recolonization.
- Use weights to anchor the bottom barrier to the bank or shoreline
- Roll out Aquascreen® from a boat. It can also be unrolled underwater. For small areas, assembly may be done on the bank or shoreline then positioned in the desired area
- Gently stretch the bottom barrier and anchor it at intervals of no more than 3 meters
|
